As the spray dryer manufacturers, it is clear that the spray dryer equipment needs to be serviced and maintained after a period of continuous testing or production, because if it is not serviced or maintained, part of the accessories will cause damage or pollution, then how to maintain the spray dryer?

Spray dryer manufacturers teach daily maintenance cleaning

(1) Clean the drying chamber of the spray dryer to remove dirt and residual impurities.

(2) Check whether the pneumatic valve works properly and whether the seal is good.

(3) Check whether the control valves and pressure regulators are working properly.

(4) Clean the dirt and impurities on the surface of the temperature and pressure gauges, and check whether the values shown on the two gauges meet the specified requirements.

(5) Pay attention to check whether there is any abnormality in the sound emitted by the steam ejector.

(6) Ensure that the motor and condensing pump must operate smoothly and without noise, etc.

Spray dryer manufacturers teach weekly maintenance

(1) Cleaning the drying chamber of the spray dryer, removing rust, scale, and impurities.

(2) Check the broken valve and remove the foreign matter from the broken valve filter.

(3) check the cylinder and the pneumatic door and add oil to the sliding rod. Ensure that the spray dryer drying chamber can have a high degree of sealing.

(4) Check the working condition of each part, and stop the machine immediately if any abnormality is found.

(5) Check the spray dryer nozzle, found that the spray water does not form a fog or plug, should be timely repair or replacement, and so on.

The above is the spray dryer maintenance method, I hope to give you help. Changzhou Jinqiao Spray Drying and Engineering is a Spray dryer manufacturer. Professional production spray dryer, if you have any needs or questions, you can contact us directly.